Troubleshooting Techniques for Solar LED Street Light
Solar led street light is a good way to demonstrate your green initiative and provide good lighting in all types of areas, but what will you do when they fail and do not appear at the expected time? There are some tips and tricks for fault diagnosis of solar LED street light, which can help you determine the problem. The following are the most common problems in commercial and residential solar LED street light and how to determine these problems.Sometimes, the solar LED street light will not be as bright as before, which is usually caused by the dead battery. For solar LED street light, if the size is suitable for the application, the battery should last for five to seven years. If this is achieved, it is time to contact the manufacturer and obtain a replacement battery.Another problem may be that the solar panels are dirty and cannot generate the energy needed to fully charge the batteries. This is a simple repair and one of the easiest things to check. Check the solar panel to see if it is dirty, and then follow the steps to clean the solar panel to see if it is helpful for the normal operation of the system. This does not need to happen frequently, especially when your panel is at an angle and it rains frequently to prevent dust and dirt from accumulating on the panel.Finally, see if the solar panel is covered. Trees and the surrounding landscape will grow with the passage of time and will cause shadows on the panel, making the battery unable to fully charge. Make sure there is no place higher than the panel near the south where the system is installed. Solar panels need direct sunlight all day long, and even the smallest shadow can change the output of solar panels.Since you already know the basic knowledge of troubleshooting solar LED street light, you should be able to easily find out the problem and how to repair it. If you need additional troubleshooting assistance, please contact your manufacturer for more support.
中文简体