How Does LED Street Lights Manufacturers Carry out Inspection and Maintenance
A good LED street light should be durable, with few abnormal or damaged cases, and basically requires little maintenance. However, no matter how good the product quality is, there may be some problems that need to be checked, maintained and maintained. From time to time, we will also see that some LED street lights on the highway will not work or turn on lights, or work abnormally, such as flashing screens, etc. Then, how should the installed LED street lights be inspected and maintained? Led street lights Manufacturers tell us several important methods and precautions.First of all, the first step of inspection and maintenance should appear when installing LED street lights, with emphasis on inspection. The wiring installation of LED street lights is simpler than that of solar street lights. Generally, the positive and negative wire connections shall be correctly distinguished, and the connection between lights and power supply and commercial power shall be firmly and accurately connected. After installation, the lighting test shall be conducted.Secondly, after a period of use, observe whether there are any abnormal working places of individual LED street lights. Generally, there are two aspects of abnormal working:1. One is not to turn on the light, the other is to turn on the light but will flash, one on and one off. If the lights are not turned on, it is necessary to check the possible problems one by one. First of all, non-product causes, such as distribution box problems and wiring problems, should be investigated.2. If something other than the product is normal, then the problem is the product itself. Generally, there are no lights, basically for three reasons. One is the problem of lights, the other is the problem of power supply, and the other is the looseness of wiring. Therefore, troubleshooting based on these three points can basically complete the inspection work, and then repair or replace damaged accessories.